Brand New Planetary/Gear Reduction Starter for all 1600's and 2000's. Easy install no modification required.

There are 2 different versions of this starter. 1 which is longer in length than the other. We have always opt for the shorter version, OVERALL LENGTH 7 1/4 to 3/8 INCHES, for the obvious clearance issues and OURS work with our headers and also AC Industries headers.

Another Datsun Parts first. We were the very first vendor, without question, to offer this starter.

Overshadowing even the U20 starter with superior torque, this unit also features a Bendix gear that pops out, engages the ring gear before it starts turning, thus saving the ring gear teeth from eventual wear. In addition, this unit is fully sealed and enclosed not vulnerable to rear main seal oil spun up on the back side of the flywheel which in un-sealed antique open snout designs, like the 1600 and 2000, usually results in the starter filling up with oil leading to poor electrical contact and brush breakdown. Most of the 1600 and 2000 starters have been around for 30 years having been heated up burnt-to-death and rebuilt 10 or 15 times (which is usually the case). Fits with all brands of headers.

All our starters work with the original exhaust manifold and headers